Vehicle Defect

Vehicle Defect Explained

A vehicle defect notice is issued when a vehicle is found to be unsafe or not meeting the required road safety standards. This can happen during a roadside inspection or by authorities such as police or transport officers. A defect notice means the vehicle has a problem that must be fixed before it can continue to be legally driven on public roads.

There are different types of defect notices depending on the severity of the issue. Minor defects usually allow you to continue driving for a limited time while repairs are completed, whereas major defects may require the vehicle to be taken off the road immediately until it is repaired. In some cases, the vehicle may need to be towed if it is considered unsafe to drive.

To clear a defect notice, the vehicle must be repaired and then inspected to confirm it meets safety standards again. This may involve obtaining a Roadworthy Certificate (RWC) or attending a VicRoads inspection, depending on the type of defect issued. Once the vehicle passes inspection, the defect notice can be cleared and the vehicle can legally return to the road.

It’s important to act quickly when you receive a defect notice, as there are strict timeframes to complete repairs. Failing to fix the issue within the allowed time can result in registration suspension or further penalties.

If you’re unsure about your defect notice or what steps to take, a licensed vehicle tester can guide you through the process and help ensure your vehicle is repaired and compliant as quickly as possible.
Exemptions Explained

Understanding Roadworthy Exemptions is essential if you’re buying, selling, or transferring a vehicle in Victoria. Roadworthy Exemptions apply to specific vehicles that do not require a roadworthy certificate under certain conditions, meaning not every vehicle transaction requires a full inspection. Many vehicle owners are unaware of Roadworthy Exemptions, which can save both time and money when dealing with registration or ownership transfers. Knowing when Roadworthy Exemptions apply ensures you remain compliant with VicRoads regulations while avoiding unnecessary inspections.

Roadworthy Exemptions commonly apply to brand new vehicles, certain trailers, motorcycles, and specially constructed vehicles that are not primarily used for transporting passengers or goods. For example, brand new vehicles that have never been registered may fall under Roadworthy Exemptions, meaning a roadworthy certificate is not required at the time of sale or registration. Additionally, light trailers and recreational motorcycles may also qualify under Roadworthy Exemptions, depending on their classification and usage. Understanding these categories of Roadworthy Exemptions is important to determine whether your vehicle qualifies.

It’s also important to note that while Roadworthy Exemptions remove the requirement for a roadworthy certificate, they do not mean the vehicle is exempt from being safe. Vehicles under Roadworthy Exemptions must still meet general safety standards and may still be subject to inspections under different circumstances, such as defect notices or compliance checks. Many drivers mistakenly believe that Roadworthy Exemptions mean no rules apply, but in reality, Roadworthy Exemptions only apply to the certification process, not vehicle safety obligations.

In some cases, Roadworthy Exemptions may still require additional documentation or conditions, especially if the vehicle is being transferred, modified, or re-registered. For example, if a vehicle has been issued a defect notice, Roadworthy Exemptions may no longer apply until the issue is resolved and cleared through inspection. This highlights why understanding the limitations of Roadworthy Exemptions is just as important as knowing when they apply.

If you’re unsure whether your vehicle qualifies for Roadworthy Exemptions, it’s always best to consult with a licensed vehicle tester or a professional inspection centre. At Ringwood Roadworthy Centre, we help customers understand Roadworthy Exemptions and determine whether a roadworthy certificate is required for their specific situation. By getting the right advice, you can confidently navigate Roadworthy Exemptions and ensure your vehicle complies with all legal requirements.
When do you need an RWC

Knowing when you need a Roadworthy Certificate (RWC) is important when dealing with vehicle ownership, registration, or compliance in Victoria. An RWC is required to confirm that a vehicle meets the minimum safety standards needed to be legally driven on public roads.

One of the most common situations where an RWC is required is when selling a vehicle privately. The seller must provide a valid certificate to the buyer to complete the ownership transfer. This ensures the vehicle is safe at the time of sale and meets VicRoads requirements.

You will also need an RWC when transferring registration into a new owner’s name. Without a valid certificate (unless an exemption applies), the transfer cannot be completed. Similarly, if a vehicle has been unregistered and you want to put it back on the road, it must pass a roadworthy inspection before registration is approved.

In some cases, an RWC is required after a vehicle has been issued a defect notice. Once repairs are completed, the vehicle may need to be inspected to confirm it is safe again and meets compliance standards before it can legally return to the road.

It’s important to understand that a Roadworthy Certificate does not guarantee the overall mechanical condition of a vehicle—it only confirms that key safety components meet minimum standards at the time of inspection.

If you’re unsure whether your situation requires an RWC, speaking with a licensed vehicle tester can help you avoid delays and ensure everything is completed correctly.
What is Checked
A roadworthy inspection focuses on the key safety components of a vehicle to ensure it is safe to be driven on public roads. The inspection is not a full mechanical check, but rather a safety assessment of the most critical parts of the vehicle.

During a roadworthy inspection, the tester will check the wheels and tyres to ensure they have sufficient tread and are free from damage. The braking system is also carefully inspected to confirm it is working effectively, along with the steering and suspension to make sure the vehicle can be controlled safely.

The condition of seats and seatbelts is checked to ensure they are secure and functioning properly, as these are essential for passenger safety. Lights, indicators, and reflectors are also tested to confirm they are working correctly and clearly visible to other road users.

Visibility is another important part of the inspection. This includes checking the windscreen for cracks, as well as ensuring wipers and washers are operating properly. The overall vehicle structure is also reviewed to identify any major damage or corrosion that could affect safety.

It’s important to understand that a roadworthy inspection only covers safety-related items. It does not assess the general mechanical condition of the vehicle or guarantee long-term reliability, but simply confirms that the vehicle meets the minimum standards required to be driven safely at the time of inspection.

It includes:

wheels and tyres

steering, suspensions and braking systems

seats and seatbelts

lights and reflectors

windscreen, and windows, including front wipers and washers

vehicle structure

other safety-related items on the body, chassis or engine.
RWC Duration

A Roadworthy Certificate (RWC) in Victoria is valid for 30 days from the date it is issued. This means the certificate must be used within that timeframe to complete a vehicle sale, transfer, or registration process. If the 30-day period expires, the certificate is no longer valid and a new roadworthy inspection will be required.

The purpose of this limited duration is to ensure that the vehicle’s safety condition is current at the time of the transaction. Since a vehicle’s condition can change over time, the 30-day validity ensures that the inspection reflects the vehicle’s present safety status rather than an outdated assessment.

It’s also important to understand that the RWC only confirms the vehicle was roadworthy at the time of inspection. It does not guarantee the vehicle will remain in the same condition throughout the entire 30 days.

If a vehicle fails the initial inspection, the owner is typically given a short period (usually 14 days) to repair the issues and return for a reinspection. If this timeframe is missed, a full inspection may be required again, which can affect timing if you are planning to sell or transfer the vehicle.

For this reason, it’s always recommended to organise your roadworthy inspection close to when you intend to sell or transfer the vehicle, so you can make full use of the RWC duration without delays.
Cost
The cost of getting a roadworthy can depend on the age, type and condition of a vehicle.

You can ask for a quote from a Licensed Vehicle Tester.

If the vehicle fails the test

If an item fails to meet the requirements, the vehicle tester will issue a rejection report. You’ll be given 14 days to repair or replace the rejected item/s and have them re-inspected.

If more than 14 days lapse, another full inspection will be required.

$299 roadworthy whilst you wait

2nd inspection fee of $88 within 14 days of the first test.

2nd inspection fee waived if all repairs are completed in our workshop.